• 110mohm (5V Input) High-Side MOSFET Switch.
• 1A Continuous Load Current per Channel.
• 110uA Typical On-State Supply Current.
• 1uA Typical Off-State Supply Current.
• Current-Limit / Short Circuit Protection.
• Fault Flag with 3ms filter eliminates false assertions. (1518D)
• Thermal Shutdown Protection under Overcurrent Condition.
• Undervoltage Lockout Ensures that Switch is off at Start Up.
• Open-Drain Fault Flag.
• Slow Turn ON and Fast Turn OFF.
• Enable Active-High or Active-Low.

• USB Power Management.
• Hot Plug-In Power Supplies.
• Battery-Charger Circuit.

The AIC1518 is a dual high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Both high-side switches are MOSFET with 110mĂ R_DS(ON), which meets USB voltage drop requirements for maximum transmission wire length.

Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to  1.25A, and the thermal shutdown functions of the power switches independently control their channel under overcurrent condition. Guaranteed minimum output rise time limits inrush current during hot plug-in as well as minimizing EMI and prevents the voltage at upstream port from dropping excessively.